Shown above is the Yaesu FT400DR driving the Yaesu HRI200 connecting my radio station to many stations around the world by blending rf and VoIP communications together. If you are ever in or close to Bessemer/Hoover Alabama area feel free to use my System Fusion Gateway. It operates on frequency 147.500 (digital mode only). Feel free to connect to anywhere in the world!
What follows is how Yaesu explains System Fusion:
The Four Operating Modes of System Fusion
V/D (Digital Narrow) – Voice+Digital or “V/D” mode
Voice FR (VW) Mode – Utilizes all available bandwidth for high-fidelity voice operation, providing the most crystal clear of voice communications.
Highspeed Data
Transfer data such as images or text messages at full rate with speeds up to 9600 Bits-per-second
Analog FM Mode
Maintains backwards compatibility with existing Analog FM Equipment, allowing a wide range of users to experiment with System Fusion Digital.
Capabilities such as Automatic Mode Select (AMS) On the DR-1X Repeater allow an even wider range of users to communicate, by running the repeater in “Fixed FM” mode on Transmit, and “Automatic Mode Select” on receive the repeater will automatically detect the incoming signal and convert it to an Analog FM Transmission. This mode allows digital users to communicate with existing Analog FM users without the need to switch their radios into FM Mode, allowing crystal clear Digital reception into the repeater that is converted into a conventional FM Signal.
Automatic Mode Select – Complete Digital Co-existence
This function instantly recognizes whether the received signal is C4FM digital or conventional FM. The communication mode automatically switches to match the received mode. Even if a digital signal is being used, you can switch to FM communication if radio signals are received from a FM station. This function enables stress-free operation by removing the need to manually switch the communication method each time.
AMS function breaks down into the following operating modes that are fully selectable by the radio user:
- AUTO: The both RX/ TX mode is automatically selected from one of the four operating modes (DN, VW, DW and FM) to match the characteristics of the received signal. This is the current AMS operation.
- TX MANUAL: The both RX/ TX mode is automatically selected from four operating modes to match the characteristics of the received signal. And if desired to change the TX mode, by pressing the Microphone PTT switch momentarily, the TX mode switch between DN and FM modes.
- TX FM FIXED: The RX mode is automatically selected from one of the four operating modes, but the TX mode is fixed to FM.
- TX DN FIXED: The RX mode is automatically selected from one of the four operating modes, but the TX mode is fixed to the ‘DN’ (Digital Voice Narrow) mode.
- TX VW FIXED: The RX mode is automatically selected from one of the four operating modes, but the TX mode is fixed to the ‘VW’ (Digital Voice Wide) mode.
Enhanced Communication Functions of System Fusion
Yaesu incorporated a suite of features within the System Fusion product line that are designed specifically for Amateur Radio Use. These features allow the operator to transmit High quality digital voice simultaneously along with Digital Data, and a High Rate (Data FR Mode) dedicated Digital Data mode that provides a method of transmitting Images, Text message and Telemetry Data at a high rate of speed.
Group Monitor (GM)
Digital Group Monitor automatically checks whether users within a communication group are in or out of range, and displays information such as distance and orientation on the screen of the client radio for up to 24 Stations.
Each individual group can share Text and Picture messages between themselves, allowing intelligent control of how content is distributed amongst a large operating group.
Group Monitor is almost an invaluable feature when an operator or group of operators needs to track resources, such as in an emergency communication operation. Resources can easily be tracked and controlled, letting operators know when they are going to fall out of range and may need to return to the coverage area, or providing invaluable telemetry data for locating and tracking individual operators.
Snapshot Function (Picture Messaging)
By simply connecting the optional MH-85A11U Speaker Microphone with Camera, an operator can quickly take advantage of the high speed data functions of any System Fusion C4FM radio and can easily transmit images to other C4FM users.
Image data which sent from a group member is displayed on the full-color screen of the FTM-400DR or Monochromatic display of the FT2DR. This image data also retains a time record and the GPS location data of the snapshot. It is easy to navigate to that pictured location by using back track function. In addition, you can observe on the screen whether the transmitted data was successfully received by the member station. The snapshot image or received data is stored in a high capacity micro SD card, and you can recall and send that image data from the SD card anytime. The pictures and data files may be easily viewed and edited by using a personal computer by simply inserting the SD Card into any SD Card reader.
Smart Navigation Functions/Backtrack Function
The Smart/Real-time navigation function enables location checking at any time. In digital V/D mode, information such as position data is transmitted together with voice signals so the distance and direction to the other stations can be displayed in real-time while communicating with them.
The Backtrack Function enables navigation to a registered location at the touch of a button. When hiking or camping, simply register your starting point or campsite before departure, and the distance and orientation from the current location are displayed on the screen.
Text Messaging
Text messaging could not be simpler, with direct entry via T9 Text input or the On Screen Keyboard (FTM-400), messages can be sent quickly to an individual operator or group of operators (GM Mode).
Easy Infrastructure Migration
Migrating to System Fusion could never be easier! Since System Fusion enables the operator to quickly select operating modes using the revolutionary AMS (Automatic Mode Select) System, backwards-compatibility is fully maintained. Using the Yaesu DR-1X Repeater enables seamless integration with existing Analog systems.
Two main factors make System Fusion the ideal choice for existing infrastructure replacement:
- Increased spectrum efficiency – Yaesu System Fusion allows a repeater trustee, club or group to install a Digital Repeater that is also analog, thus eliminating the need for an extra frequency pair to perform digital communications. By using the System Fusion DR-1X Repeater the trustee can add Digital AND Analog capabilities to an existing 2-Meter or 70CM Repeater pair without the need for an additional frequency pair that is dedicated to Digital Only communications.
- Easy Installation and configuration – Most Yaesu System Fusion customers have reported replacing current infrastructure only takes about 15 minutes. Intuitive touch screen interfaces and simple programming make repeater installation a breeze.
WiRES-X – Wide-Coverage Internet Repeater Enhancement System
WIRES-X (Wide-Coverage Internet Repeater Enhancement System) is a comprehensive and easy-to-use system for linking repeaters and/or home stations together, using Internet voice technology. Now you can talk to old friends, or make new ones, around the world.
More information on WiRES-X Can be found by visiting the WiRES-X Information Page